H3C SOHO IE4300, Command Reference Manual

Page: 1181 / 3296

22
Use
undo preference
to restore the default.
Syntax
preference { preference | route-policy route-policy-name } *
undo preference
Default
The preference of RIP routes is 100.
Views
RIP view
Predefined user roles
network-admin
Parameters
preference
: Specifies a preference for RIP routes, in the range of 1 to 255. The smaller the value,
the higher the preference.
route-policy route-policy-name
: Specifies a routing policy by its name, a case-sensitive
string of 1 to 63 characters.
Usage guidelines
You can specify a routing policy by using the keyword
route-policy
to set a preference for
matching RIP routes.
•
The preference set by the routing policy applies to all matching RIP routes. The preference of
other routes is set by the
preference
command.
•
If no preference is set by the routing policy, the preference of all RIP routes is set by the
preference command.
Examples
# Set a preference of 120 for RIP routes.
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] preference 120
reset rip process
Use reset rip process to reset a RIP process.
Syntax
reset rip process-id process
Views
User view
Predefined user roles
network-admin
Parameters
process-id
: Specifies a RIP process by its ID in the range of 1 to 65535.
Usage guidelines
After executing the command, you are prompted to confirm the operation.