H3C SOHO IE4300, Command Reference Manual

Page: 175 / 3296

15
Usage guidelines
Generally, file systems on a hot-swappable storage medium are automatically mounted when the
storage medium is connected to the device. If the system cannot recognize a file system, however,
you must mount the file system before you can access it.
To avoid file system corruption, do not perform the following tasks while the system is mounting a file
system:
•
Reboot, power cycle, or power off the device.
•
Install or remove storage media.
•
Perform a switchover.
To remove a hot-swappable storage medium from the device, you must first unmount all file systems
on the storage medium. Removing a mounted hot-swappable storage medium might damage files
on the storage medium or even the storage medium.
Examples
# Mount a file system on the USB disk.
<Sysname> mount usba0:
Related commands
umount
move
Use
move
to move a file.
Syntax
move source-file { dest-file | dest-directory }
Views
User view
Predefined user roles
network-admin
Parameters
source-file
: Specifies the name of the source file.
dest-file
: Specifies the name of the destination file.
dest-directory : Specifies the name of the destination directory.
Usage guidelines
If you specify a destination directory, the system moves the source file to the specified directory
without changing the file name.
Examples
# Move the flash:/test/sample.txt file to flash:/ , and save it as 1.txt .
<Sysname> move test/sample.txt 1.txt
Move flash:/test/sample.txt to flash:/1.txt? [Y/N]:y
Moving file flash:/test/sample.txt to flash:/1.txt ...Done.
# Move the b.cfg file to the test2 directory.
<Sysname> move b.cfg test2
Move flash:/b.cfg to flash:/test2/b.cfg? [Y/N]:y
Moving file flash:/b.cfg to flash:/test2/b.cfg... Done.