49
Views
Any view
Predefined user roles
network-admin
Parameters
vlan
vlan-id
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
ipv6-source-address
: Specifies an IPv6 multicast source address.
ipv6-group-address
: Specifies an IPv6 multicast group address. The value range for this
argument is FFxy::/16 (excluding FFx1::/16 and FFx2::/16), where "x" and "y" represent any
hexadecimal numbers in the range of 0 to F.
slot
slot-number
: Specifies an IRF member device by its member ID. If you do not specify a
member device, this command clears Layer 2 IPv6 multicast fast forwarding entries for the master
device.
all
: Specifies all Layer 2 IPv6 multicast fast forwarding entries.
Examples
# Clear all Layer 2 IPv6 multicast fast forwarding entries.
<Sysname> reset ipv6 l2-multicast fast-forwarding cache all
# Clear the Layer 2 IPv6 multicast fast forwarding entry for the IPv6 group (
*
, FF1E::2).
<Sysname> reset ipv6 l2-multicast fast-forwarding cache FF1E::2
Related commands
display ipv6 l2-multicast fast-forwarding cache
reset mld-snooping group
Use
reset mld-snooping group
to clear information about dynamic MLD snooping group
entries.
Syntax
reset mld-snooping group
{
ipv6-group-address
[
ipv6-source-address
]
|
all
}
[
vlan
vlan-id
]
Views
User view
Predefined user roles
network-admin
Parameters
ipv6-group-address
: Specifies an IPv6 multicast group address. The value range for this
argument is FFxy::/16 (excluding FFx1::/16 and FFx2::/16), where "x" and "y" represent any
hexadecimal numbers in the range of 0 to F.
ipv6-source-address
: Specifies an IPv6 multicast source address. If you do not specify an
IPv6 multicast source, this command clears information about dynamic MLD snooping group entries
for all IPv6 multicast sources.
all
: Specifies all IPv6 multicast groups.
vlan vlan-id
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a
VLAN, this command clears information about dynamic MLD snooping group entries for all VLANs.
Summary of Contents for SOHO IE4300
