25
Default
The SNMP module examines the system configuration for changes at intervals of 600 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
interval
: Specifies the intervals at which the SNMP module examines the system configuration
for changes, in seconds. The value range for this argument is 1 to 86400.
Usage guidelines
The SNMP module examines the system running configuration, startup configuration, and
next-startup configuration file for changes periodically and generates a log if any change is found. If
SNMP notification for configuration changes has been enabled, the system generates also an SNMP
notification.
You can use this command to modify the examination interval.
Examples
# Set the intervals at which the SNMP module examines the system configuration for changes to 600
seconds.
<sysname> system-view
[sysname] snmp-agent configuration-examine interval 600
Related commands
snmp-agent trap enable
snmp-agent context
Use
snmp-agent context
to create an SNMP context.
Use
undo snmp-agent context
to delete an SNMP context.
Syntax
snmp-agent context context-name
undo snmp-agent context context-name
Default
No SNMP contexts exist.
Views
System view
Predefined use roles
network-admin
Parameters
context-name
: Specifies an SNMP context, a case-sensitive string of 1 to 32 characters.
Usage guidelines
For an NMS and an SNMP agent to communicate, configure the same SNMP context for them or do
not configure a context for the NMS.
Summary of Contents for SOHO IE4300
