11
•
The statistic crosses the start threshold for the first time.
•
The statistic crosses the start threshold each time after it crosses the restart threshold.
The following is the interface event monitor process of EAA:
1.
Compares the traffic statistic sample with the start threshold at sampling intervals until the start
threshold is crossed.
2.
Executes the policy.
3.
Compares the traffic statistic sample with the restart threshold at sampling intervals until the
restart threshold is crossed.
4.
Compares the traffic statistic sample with the start threshold at sampling intervals until the start
threshold is crossed.
5.
Executes the policy again.
This process cycles for the monitor policy to be executed and re-executed.
Examples
# Configure a CLI-defined policy to monitor the incoming error packet statistic on GigabitEthernet
1/0/1 every 60 seconds. Set the start threshold to 1000 and the restart threshold to 50. Enable EAA
to execute the policy when the statistic exceeds 1000 for the first time. Enable EAA to re-execute the
policy if the statistic exceeds 1000 each time after the statistic has dropped below 50.
<Sysname> system-view
[Sysname] rtm cli-policy test
[Sysname-rtm-test] event interface gigabitethernet 1/0/1 monitor-obj input-errors
start-op gt start-val 1000 restart-op lt restart-val 50 interval 60
event process
Use
event process
to configure a process event for a CLI-defined monitor policy.
Use
undo event
to delete the event in a CLI-defined monitor policy.
Syntax
event process
{
exception
|
restart
|
shutdown
|
start
}
[
name process-name
[
instance instance-id
]
]
[
slot
slot-number
]
undo event
Default
No process event is configured.
Views
CLI-defined policy view
Predefined user roles
network-admin
Parameters
exception
: Monitors the specified process for exceptional events. EAA executes the policy when
an exception occurs to the monitored process.
restart
: Monitors the specified process for restart events. EAA executes the policy when the
monitored process restarts.
shutdown
: Monitors the specified process for shutdown events. EAA executes the policy when the
monitored process is shut down.
Summary of Contents for SOHO IE4300
