1
Software upgrade commands
As a best practice, store the startup images in a fixed storage medium. If you store the startup
images in a hot swappable storage medium, do not remove the hot swappable storage medium
during the startup process.
boot-loader file
Use
boot-loader file
to specify startup image files.
Syntax
boot-loader file boot filename system
filename
[
feature
filename
&<1-30>
]
[
patch
filename
&<1-16> ]
{
all
|
slot
slot-number
}
{
backup
|
main
}
boot-loader file ipe-filename
[
patch
filename
&<1-16> ]
{
all
|
slot
slot-number
}
{
backup
|
main
}
Views
User view
Predefined user roles
network-admin
Parameters
boot
: Specifies a boot image file.
system
: Specifies a system image file.
feature
: Specifies a space-separated list of up to 30 feature image files.
patch
: Specifies a space-separated list of up to 16 patch image files. You can specify only
non-incremental patch image files.
filename
: Specifies a .bin file in the
filesystemname/filename.bin
format. The file must be stored
in the root directory of a file system on the device. Excluding the file system location section (if any),
the value string can have a maximum of 63 characters. For more information about specifying a file,
see
Fundamentals Configuration Guide
.
ipe-filename
: Specifies an .ipe image package file in the
filesystemname/filename.ipe
format.
The file must be stored in the root directory of a file system on the device. Excluding the file system
location section (if any), the value string can have a maximum of 63 characters. For more
information about specifying a file, see
Fundamentals Configuration Guide
.
all
: Specifies all hardware components to which the specified images apply.
slot slot-number
: Specifies the IRF member ID of a member device.
backup
: Specifies the files as backup startup image files. Backup images are used only when main
images are not available.
main
: Specifies the files as main startup image files. The device always first attempts to start up
with main startup files.
Usage guidelines
The
boot-loader file
command overwrites the entire startup image list. To add new startup
feature images, specify all feature image files in the old startup image list, including feature image
files. The new startup image list will contain only the feature image files that are specified in the
command.
Summary of Contents for SOHO IE4300
