18
The number of CDP error frames : 0
# Display the LLDP statistics for the nearest customer bridge agents on GigabitEthernet 1/0/1.
<Sysname> display lldp statistics interface GigabitEthernet1/0/1 agent nearest-customer
LLDP statistics information of port 1 [GigabitEthernet1/0/1]:
LLDP agent nearest-customer:
The number of LLDP frames transmitted : 0
The number of LLDP frames received : 0
The number of LLDP frames discarded : 0
The number of LLDP error frames : 0
The number of LLDP TLVs discarded : 0
The number of LLDP TLVs unrecognized : 0
The number of LLDP neighbor information aged out : 0
The number of CDP frames transmitted : 0
The number of CDP frames received : 0
The number of CDP frames discarded : 0
The number of CDP error frames : 0
Table 3 Command output
Field
Description
LLDP statistics global information
Global LLDP statistics.
LLDP neighbor information last change time
Time when the neighbor information was last
updated.
The number of LLDP neighbor information inserted
Number of times neighbor information was added.
The number of LLDP neighbor information deleted
Number of times neighbor information was removed.
The number of LLDP neighbor information dropped
Number of times neighbor information was dropped
due to lack of available memory space.
display lldp status
Use
display lldp status
to display LLDP status.
Syntax
display lldp status
[
interface interface-type interface-number
]
[
agent
{
nearest-bridge
|
nearest-customer
|
nearest-nontpmr
}
]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number
: Specifies a port by its type and number.
If you do not specify this option, the command displays the global LLDP status and the LLDP status
of all ports.
agent
: Specifies an LLDP agent type. If you do not specify an agent type, the command displays
the status information for all LLDP agents.
Summary of Contents for SOHO IE4300
