H3C SOHO IE4300, Command Reference Manual

Page: 1090 / 3296

2
<Sysname> system-view
[Sysname] rib
[Sysname-rib] address-family ipv6
[Sysname-rib-ipv6]
display ip routing-table
Use
display ip routing-table
to display routing table information.
Syntax
display ip routing-table [ all-vpn-instance | vpn-instance
vpn-instance-name ] [ verbose ]
display ip routing-table [ all-routes ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
all-vpn-instance
: Specifies all VPN instances.
vpn-instance vpn-instance-name
: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters.
all-routes
: Displays routing table information for the public network and all VPN instances.
verbose : Displays detailed routing table information, including information about both active and
inactive routes. If you do not specify this keyword, the command displays only brief information about
active routes.
Usage guidelines
If you do not specify any parameters, the command displays routing table information for the public
network.
Examples
# Display brief information about active routes in the routing table.
<Sysname> display ip routing-table
Destinations : 12 Routes : 12
Destination/Mask Proto Pre Cost NextHop Interface
0.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
127.255.255.255/32 Direct 0 0 127.0.0.1 InLoop0
192.168.1.0/24 Direct 0 0 192.168.1.40 Vlan11
192.168.1.0/32 Direct 0 0 192.168.1.40 Vlan11
192.168.1.40/32 Direct 0 0 127.0.0.1 InLoop0
192.168.1.255/32 Direct 0 0 192.168.1.40 Vlan11