H3C SOHO IE4300, Command Reference Manual

Page: 3215 / 3296

22
ptp syn-interval
ptp port-mode
Use ptp port-mode to configure the port type as OC for a TC+OC (including E2ETC+OC and
P2PTC+OC) clock.
Use undo ptp port-mode to restore the default.
Syntax
ptp port-mode oc
undo ptp port-mode
Default
The type of all ports on an E2ETC+OC or a P2PTC+OC clock is TC.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
oc
: Specifies the port type for a TC+OC clock as OC.
Usage guidelines
This command is applicable only to E2ETC+OC and P2PTC+OC clocks and is available only after
you specify a PTP profile and a PTP mode.
The SMPTE ST 2059-2 PTP profiles does not support this command.
Examples
# Specify the clock node type as P2PTC+OC for the device. Configure the port type for
GigabitEthernet 1/0/1 as OC.
<Sysname> system-view
[
Sysname
]
ptp profile 1588v2
[
Sysname
]
ptp mode p2ptc-oc
[
Sysname
]
interface gigabitethernet 1/0/1
[
Sysname-GigabitEthernet1/0/1
]
ptp port-mode oc
Related commands
ptp mode
ptp profile
ptp priority
Use ptp priority clock-source to configure the priority for the specified clock for GM election
through BMC.
Use
undo ptp priority clock-source
to restore the specified priority to its default value.
Syntax
ptp priority clock-source local { priority1 priority1 | priority2
priority2 }