H3C SOHO IE4300, Command Reference Manual

Page: 2727 / 3296

24
Syntax
vrrp vrid virtual-router-id priority priority-value
undo vrrp vrid virtual-router-id priority
Default
The priority of a device in an IPv4 VRRP group is 100.
Views
Interface view
Predefined user roles
network-admin
Parameters
virtual-router-id
: Specifies an IPv4 VRRP group by its virtual router ID. The value range for
the
virtual-router-id
argument is 1 to 255.
priority-value
: Specifies a priority value in the range of 1 to 254. A higher value indicates a
higher priority.
Usage guidelines
VRRP determines the role (master or backup) of each device in a VRRP group by priority. A device
with a higher priority is more likely to become the master.
Priorities 1 to 254 are configurable. Priority 0 is reserved for special uses, and priority 255 is for the
IP address owner. The IP address owner in a VRRP group always has a running priority of 255 and
acts as the master as long as it operates correctly.
Examples
# Set the priority of the switch to 150 in VRRP group 1 on VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp vrid 1 priority 150
Related commands
display vrrp
vrrp vrid track
vrrp vrid shutdown
Use
vrrp vrid shutdown
to disable an IPv4 VRRP group.
Use
undo vrrp vrid shutdown
to enable an IPv4 VRRP group.
Syntax
vrrp vrid virtual-router-id shutdown
undo vrrp vrid virtual-router-id shutdown
Default
An IPv4 VRRP group is enabled.
Views
Interface view