H3C SOHO IE4300, Command Reference Manual

Page: 1338 / 3296

7
Views
System view
Predefined user roles
network-admin
Parameters
ipv6-address prefix-length
: Specifies the IPv6 address and prefix length.
interface-type interface-number
: Specifies an output interface by its type and number. If
the output interface is an NBMA interface or broadcast interface and not a point-to-point (P2P)
interface, the next hop address must be specified.
next-hop-address : Specifies the next hop IPv6 address.
bfd
: Enables BFD to detect reachability of the static route's next hop.
control-packet
: Specifies the BFD control packet mode.
bfd-source ipv6-address
: Specifies the source IPv6 address of BFD packets.
echo-packet : Specifies the BFD echo packet mode.
permanent
: Specifies the IPv6 route as a permanent IPv6 static route. If the output interface is
down, the permanent IPv6 static route is still active.
public
: Indicates the next hop is on the public network.
vpn-instance d-vpn-instance-name
: Specifies a destination MPLS L3VPN instance by its
name, a case-sensitive string of 1 to 31 characters. If a destination VPN is specified, packets will
search for the output interface based on the specified next hop (IPv6 address) for the static route.
preference preference : Specifies a preference for IPv6 static routes, in the range of 1 to 255.
The default is 60.
tag tag-value : Sets a tag for marking the static route, in the range of 1 to 4294967295. The
default is 0. Tags of routes are used for route control in routing policies. For more information about
routing policies, see
Layer 3—IP Routing Configuration Guide .
description text
: Configures a description for the IPv6 static route, which consists of 1 to 60
characters, including special characters such as the space, but excluding the question mark (?).
vpn-instance s-vpn-instance-name
: Specifies a source MPLS L3VPN instance by its
name, a case-sensitive string of 1 to 31 characters. Each VPN has its own routing table, and the
configured static route is installed in the routing tables of the specified VPNs.
Usage guidelines
An IPv6 static route that has the destination address configured as ::/0 (a prefix length of 0) is the
default IPv6 route. If the destination address of an IPv6 packet does not match any entry in the
routing table, this default route is used to forward the packet.
Follow these guidelines to configure the output interface, next hop address, or both for a static route:
•
If the output interface is a broadcast interface or an NBMA interface, the next hop address must
be specified.
•
If the output interface is a P2P interface, you can specify only the output interface. You do not
need to change the configuration of the route even if the peer address is changed.
Follow these guidelines when you configure BFD for IPv6 static routes:
•
If you specify a source IPv6 address for BFD packets on the local device, you must specify that
IPv6 address as the next hop IPv6 address on the peer device.