7
If the specified neighbor has already received an LSA, the LSA still exists in the LSDB of the
neighbor after you execute the command.
Examples
# Filter all LSAs (except the Grace LSAs) for the P2MP neighbor with the IP address 121.20.20.121.
<Sysname> system-view
[Sysname] ospf 1
[Sysname-ospf-1] database-filter peer 121.20.20.121 all
# Configure advanced ACL 3000 to filter Type-3 LSAs for the P2MP neighbor with the IP address
121.20.20.121.
<Sysname> system-view
[Sysname] acl advanced 3000
[Sysname-acl-ipv4-adv-3000] rule 10 deny ip source 121.20.0.0 0 destination 255.255.0.0
0
[Sysname-acl-ipv4-adv-3000] rule 100 permit ip
[Sysname-acl-ipv4-adv-3000] quit
[Sysname] ospf 1
[Sysname-ospf-1] database-filter peer 121.20.20.121 summary acl 3000
Related commands
ospf database-filter
default (OSPF view)
Use
default
to configure default parameters for redistributed routes.
Use
undo
default
to remove the configuration.
Syntax
default
{
cost
cost-value
|
tag
tag
|
type type
}
*
undo default
{
cost
|
tag
|
type
}
*
Default
The cost is 1, the tag is 1, and the route type is 2.
Views
OSPF view
Predefined user roles
network-admin
Parameters
cost cost-value
: Specifies a default cost for redistributed routes, in the range of 0 to 16777214.
tag tag
: Specifies a tag for redistributed routes, in the range of 0 to 4294967295.
type type
: Specifies a type for redistributed routes: 1 or 2.
Examples
# Set the default cost, tag, and type to 10, 100, and 2 for redistributed external routes.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] default cost 10 tag 100 type 2
Summary of Contents for SOHO IE4300
