H3C SOHO IE4300, Command Reference Manual

Page: 2986 / 3296

18
snmp-agent
Use
snmp-agent
to enable the SNMP agent.
Use
undo snmp-agent
to disable the SNMP agent.
Syntax
snmp-agent
undo snmp-agent
Default
The SNMP agent is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The SNMP agent is automatically enabled when you execute any command that begins with
snmp-agent
except for the
snmp-agent calculate-password
command.
The SNMP agent will fail to be enabled when the port that the agent will listen on is used by another
service. You can use the
snmp-agent port
command to specify a listening port. To view the UDP
port use information, execute the
display udp verbose
command.
If you disable the SNMP agent, the SNMP settings do not take effect. The
display
current-configuration command does not display the SNMP settings. The SNMP settings
will not be saved in the configuration file. For the SNMP settings to take effect, enable the SNMP
agent.
Examples
# Enable the SNMP agent.
<Sysname> system-view
[Sysname] snmp-agent
Related commands
display udp verbose
(see IP performance optimization commands in Layer 3—IP Services
Configuration Guide )
snmp-agent port
snmp-agent { inform | trap } source
Use
snmp-agent { inform | trap } source
to specify a source IP address for the informs or
traps sent by the SNMP agent.
Use
undo snmp-agent { inform | trap } source
to restore the default.
Syntax
snmp-agent { inform | trap } source interface-type interface-number
undo snmp-agent { inform | trap } source