29
display process memory heap address
exception filepath
Use
exception filepath
to specify the directory for saving core dump files.
Use
undo exception filepath
to remove the specified directory.
Syntax
exception filepath directory
undo exception filepath
directory
Default
The directory for saving core dump files is the root directory of the default file system. For more
information about the default file system, see file system management in
Fundamentals
Configuration Guide
.
Views
User view
Predefined user roles
network-admin
Parameters
directory
: Specifies the directory for saving core dump files. The directory must be the root
directory of a file system.
Usage guidelines
The system will save core dump files to the
core
folder in the specified directory on the master. If the
core
folder does not exist in the specified directory, the system creates the
core
folder before saving
core dump files.
You can use the command to change the directory if there are different types of storage media on the
device.
If no directory is specified or the specified directory is not accessible, the system cannot save core
dump files.
Examples
# Set the directory for saving core dump files to flash:/.
<Sysname> exception filepath flash:/
Related commands
display exception filepath
process core
monitor kernel deadloop action
Use
monitor kernel deadloop action
to specify the action to be taken in response to a
kernel thread deadloop.
Use
undo monitor kernel deadloop action
to restore the default.
Syntax
monitor kernel deadloop action
{
reboot
|
record-only
}
[
slot
slot-number
[
cpu
cpu-number
]
]
Summary of Contents for SOHO IE4300
