H3C SOHO IE4300, Command Reference Manual

Page: 498 / 3296

33
stp log enable tc
Use
stp log enable tc
to enable the device to log events of detecting or receiving TC BPDUs.
Use
undo stp log enable tc
to restore the default.
Syntax
stp log enable tc
undo stp log enable tc
Default
In PVST mode, the device does not generate logs when it detects or receives TC BPDUs.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command applies only to PVST mode.
Examples
# In PVST mode, enable the device to log events of detecting or receiving TC BPDUs.
<Sysname> system-view
[Sysname] stp log enable tc
stp loop-protection
Use
stp loop-protection
to enable loop guard on a port.
Use
undo stp loop-protection
to disable loop guard on a port.
Syntax
stp loop-protection
undo stp loop-protection
Default
Loop guard is disabled.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Usage guidelines
On a port, the loop guard feature is mutually exclusive with the root guard feature or the edge port
setting.
If this command is configured in Layer 2 Ethernet interface view, it takes effect only on that interface.
If this command is configured in Layer 2 aggregate interface view, it takes effect only on the
aggregate interface.