62
attribute reject (RADIUS scheme view)
Use
attribute reject
to configure a RADIUS attribute rejection rule.
Use
undo attribute reject
to delete RADIUS attribute rejection rules.
Syntax
attribute reject attr-name
{
{
access-accept
|
access-request
|
accounting
}
*
|
{
received
|
sent
}
*
}
undo
attribute
reject
[
attr-name
]
Default
No RADIUS attribute rejection rules exist.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
attr-name
: Specifies a RADIUS attribute by its name, a case-insensitive string of 1 to 63
characters. The attribute must be supported by the system.
access-accept
: Specifies the RADIUS Access-Accept packets.
access-request
: Specifies the RADIUS Access-Request packets.
accounting
: Specifies the RADIUS accounting packets.
received
: Specifies the received RADIUS packets.
sent
: Specifies the sent RADIUS packets.
Usage guidelines
Configure RADIUS attribute rejection rules for the following purposes:
•
Delete attributes from the RADIUS packets to be sent if the destination RADIUS server does
not identify the attributes.
•
Ignore unwanted attributes in the RADIUS packets received from a RADIUS server.
The RADIUS attribute rejection rules take effect only when the RADIUS attribute translation feature
is enabled.
A RADIUS attribute can be rejected only by one criterion, packet type or direction.
If you do not specify a RADIUS attribute, the
undo
attribute
reject
command deletes all
RADIUS attribute rejection rules.
Examples
# In RADIUS scheme
radius1
, configure a RADIUS attribute rejection rule to delete the Connect-Info
attribute from the RADIUS packets to be sent.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] attribute reject Connect-Info sent
Related commands
attribute translate
Summary of Contents for SOHO IE4300
