H3C SOHO IE4300, Command Reference Manual

Page: 1244 / 3296

43
Predefined user roles
network-admin
network-operator
Parameters
process-id
: Specifies an OSPF process by ID in the range of 1 to 65535. If you do not specify this
argument, the command displays OSPF neighbor information for all OSPF processes.
hello
: Displays information about the hello packets sent to and received from neighbor routers. In
scenarios where hello packets are sent in multicast, the command displays information only about
the hello packets received from neighbor routers.
verbose
: Displays detailed neighbor information. If you do not specify this keyword, the command
displays brief OSPF neighbor information.
interface-type interface-number
: Specifies an interface by its type and number. If you do
not specify this argument, the command displays neighbor information for all interfaces.
neighbor-id
: Specifies a neighbor router ID. If you do not specify this argument, the command
displays all neighbor information.
Examples
# Display detailed OSPF neighbor information.
<Sysname> display ospf peer verbose
OSPF Process 1 with Router ID 1.1.1.1
Neighbors
Area 0.0.0.0 interface 1.1.1.1(Vlan-interface100)'s neighbors
Router ID: 1.1.1.2 Address: 1.1.1.2 GR state: Normal
State: Full Mode: Nbr is master Priority: 1
DR: 1.1.1.2 BDR: 1.1.1.1 MTU: 0
Options is 0x02 (-|-|-|-|-|-|E|-)
Dead timer due in 33 sec
Neighbor is up for 02:03:35
Authentication sequence: [ 0 ]
Neighbor state change count: 6
BFD status: Disabled
Last Neighbor Down Event:
Router ID: 22.22.22.22
Local Address: 11.11.11.11
Remote Address: 22.22.22.22
Time: Apr 9 03:18:19 2014
Reason: Ospf_ifachange