H3C SOHO IE4300, Command Reference Manual

Page: 1455 / 3296

86
maximum cost of 65535. Neighbors do not send packets to the stub router as long as they have
a route with a smaller cost.
Examples
# Configure a stub router.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] stub-router r-bit
transmit-pacing
Use transmit-pacing to set the LSU transmission interval and the maximum number of LSU
packets that can be sent at each interval.
Use undo transmit-pacing to restore the default.
Syntax
transmit-pacing interval interval count count
undo transmit-pacing
Default
An OSPFv3 interface sends a maximum of three LSU packets every 20 milliseconds.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
interval interval
: Specifies an interval at which an interface sends LSU packets, in the range
of 10 to 1000 milliseconds. If the router has multiple OSPFv3 interfaces, increase the interval to
reduce the total number of LSU packets sent by the router every second.
count count
: Specifies the maximum number of LSU packets sent by an interface at each interval,
in the range of 1 to 200. If the router has multiple OSPFv3 interfaces, decrease the maximum
number to reduce the total number of LSU packets sent by the router every second.
Examples
# Configure all the interfaces running OSPFv3 process 1 to send a maximum of 10 LSU packets
every 30 milliseconds.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] transmit-pacing interval 30 count 10
vlink-peer (OSPFv3 area view)
Use
vlink-peer
to configure a virtual link.
Use
undo vlink-peer
to remove a virtual link.
Syntax
vlink-peer router-id [ dead seconds | hello seconds | instance instance-id
| ipsec-profile profile-name | keychain keychain-name | retransmit seconds
| trans-delay seconds ] *