H3C SOHO IE4300, Command Reference Manual

Page: 1430 / 3296

61
2
n-2
for each generation until the maximum interval is reached. The value n is the number of
generation times.
The minimum interval and the incremental interval cannot be greater than the maximum interval.
Examples
# Set the maximum LSA generation interval to 2 seconds, minimum interval to 100 milliseconds, and
incremental interval to 100 milliseconds.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] lsa-generation-interval 2 100 100
Related commands
lsa-arrival-interval
non-stop-routing
Use
non-stop-routing
to enable OSPFv3 NSR.
Use
undo non-stop-routing
to disable OSPFv3 NSR.
Syntax
non-stop-routing
undo non-stop-routing
Default
OSPFv3 NSR is disabled.
Views
OSPFv3 view
Predefined user roles
network-admin
Usage guidelines
This command takes effect only for the current process. As a best practice, enable OSPFv3 NSR for
each process if multiple OSPFv3 processes exist.
OSPFv3 NSR and OSPFv3 GR are mutually exclusive. Do not configure the non-stop-routing
command and the
graceful-restart enable
command at the same time.
Examples
# Enable NSR for OSPFv3 process 100.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] non-stop-routing
nssa (OSPFv3 area view)
Use
nssa
to configure an area as an NSSA area.
Use
undo nssa
to restore the default.
Syntax
nssa [ default-route-advertise [ cost cost-value | nssa-only |
route-policy route-policy-name | tag tag | type type ] * | no-import-route