8
Field
Description
Pri Reduced
Value by which the priority decreases when the status of the associated
track entry changes to the Negative state. This field is displayed only after
you configure the
vrrp vrid track
command.
Switchover
Switchover mode. When the status of the associated track entry changes
to the Negative state, the backup immediately becomes the master.
Forwarder Information: 2
Forwarders 1 Active
VF information: Two VFs exist, and one is the AVF.
Config Weight
Configured weight of the VF: 255.
Running Weight
Current weight of the VF.
When a track entry is associated with the VFs of a VRRP group, the VFs'
weights change when the track entry's status changes.
Forwarder 01
Information about VF 01.
State
VF state:
•
Active
—The VF is created on the device.
•
Listening
—The VF is learned from another device.
•
Initialize
—The VF is in
Initialize
state.
Virtual MAC
Virtual MAC address of the VF.
Owner ID
Real MAC address of the VF owner.
Priority
VF priority in the range of 1 to 255.
Active
IP address of the interface where the AVF resides. If the current VF is the
AVF, this field displays
local
.
Forwarder Weight Track
Configuration
VF weight Track configuration.
The field is displayed only after you configure the
vrrp vrid track
command.
Track Object
Track entry that is associated with the VFs.
The field is displayed only after you configure the
vrrp vrid track
command.
State
Track entry state:
•
Negative
.
•
Positive
.
•
NotReady
.
Weight Reduced
Value by which the weights of the VFs decrease when the state of the
associated track entry changes to Negative.
The field is displayed only after you configure the
vrrp vrid track
command.
Forwarder Switchover Track
Information:
VF switchover Track configuration.
The field is displayed only after you configure the
vrrp vrid track
command.
Member IP
IP address of a member device.
The field is displayed only after you configure the
vrrp vrid track
command.
Summary of Contents for SOHO IE4300
