H3C SOHO IE4300, Command Reference Manual

Page: 907 / 3296

15
Field Description
VID
ID of the VLAN to which the interface connected to a neighbor belongs. This field
displays
N/A if the VLAN ID is invalid.
Interface
Interface connected to a neighbor. If the interface name or link ID is not available, the
field displays
N/A . The link ID is a string with a maximum of eight hexadecimal numbers.
State
State of a neighbor:
•
INCMP —The address is being resolved. The link layer address of the neighbor is
unknown.
•
REACH —The neighbor is reachable.
•
STALE —The reachability of the neighbor is unknown. The device will not verify the
reachability unless it has data to send to the neighbor.
•
DELAY —The reachability of the neighbor is unknown. The device does not send
an NS message in the delay period.
•
PROBE —The reachability of the neighbor is unknown. The device sends an NS
message to probe the reachability of the neighbor.
Type
Neighbor information type:
•
Static —Statically configured.
•
Dynamic —Dynamically obtained.
•
Openflow —Learned from the OpenFlow module.
•
Rule —Learned from the portal module.
•
Invalid static —Invalid static configuration.
Aging
Reachable time of the neighbor:
•
For a static neighbor entry, this field displays hyphens ( -- ), representing the
neighbor entry never expires.
•
For a dynamic neighbor entry, this field displays the elapsed time in seconds. If the
neighbor is never reachable, this field displays a pound sign (#).
VPN instance
Name of a VPN instance. This field displays hyphens (
--
) if no VPN instance is
configured.
Service instance
This field is not supported in the current software version.
Ethernet service instance. If the neighbor entry does not belong to any Ethernet service
instance for the related Layer 2 Ethernet interface or Layer 2 aggregate interface, this
field displays hyphens (
-- ).
Link ID
This field is not supported in the current software version.
ID of the link that connects to the neighbor. The link ID is a string with a maximum of
eight hexadecimal numbers.
If the neighbor entry does not belong to a VSI, the field displays hyphens ( -- ).
Nickname Nickname of a neighbor entry. The name is a string of four hexadecimal numbers.
Related commands
ipv6 neighbor
reset ipv6 neighbors
display ipv6 neighbors count
Use
display ipv6 neighbors count
to display the number of neighbor entries.
Syntax
display ipv6 neighbors { { all | dynamic | static } [ slot slot-number ] |
interface interface-type interface-number | vlan vlan-id } count