H3C SOHO IE4300, Command Reference Manual

Page: 1857 / 3296

76
Usage guidelines
Use this command to exclude an attribute from RADIUS requests sent during an AAA test to help
troubleshoot authentication or accounting failures.
Before you exclude an attribute that is already configured to be included in RADIUS requests, you
must cancel the inclusion configuration by using the
undo include command.
Examples
# In RADIUS attribute test group t1 , exclude Service-Type attribute from RADIUS authentication
requests.
<Sysname> system-view
[Sysname] radius attribute-test-group t1
[Sysname-radius-attr-test-grp-t1] exclude authentication name Service-Type
Related commands
include
test-aaa
include
Use include to include an attribute in RADIUS requests.
Use
undo include
to cancel the configuration of including an attribute in RADIUS requests.
Syntax
include { accounting | authentication } { name attribute-name | [ vendor
vendor-id ] code attribute-code } type { binary | date | integer |
interface-id | ip | ipv6 | ipv6-prefix | octets | string } value
attribute-value
undo include { accounting | authentication } { name attribute-name |
[ vendor vendor-id ] code attribute-code }
Default
No attributes are configured to be included in RADIUS authentication or accounting requests.
Views
RADIUS attribute test group view
Predefined user roles
network-admin
Parameters
accounting
: Specifies RADIUS accounting requests.
authentication : Specifies RADIUS authentication requests.
name attribute-name : Specifies a standard RADIUS attribute by its name, a case-insensitive
string of 1 to 63 characters.
vendor vendor-id : Specifies a vendor by its ID in the range of 1 to 65535. If the attribute is a
standard RADIUS attribute, do not specify this option.
code attribute-code : Specifies a RADIUS attribute by its code in the range of 1 to 255.
type : Specifies a data type for the attribute content.
binary
: Binary type.