11
item-number
: Specifies a reaction entry by its ID in the range of 1 to 10. If you do not specify a
reaction entry, the command displays the results of all reaction entries.
Usage guidelines
The result fields display hyphens (-) in one of the following conditions:
•
The threshold type is the average value.
•
The monitored performance metric is ICPIF or MOS of the voice operation.
The monitoring results of an operation are accumulated, and are not cleared after the operation
completes.
Examples
# Display the monitoring results of all reaction entries of the ICMP echo operation with administrator
name
admin
and operation tag
test
.
<Sysname> display nqa reaction counters admin test
NQA entry (admin admin, tag test) reaction counters:
Index Checked Element Threshold Type Checked Num Over-threshold Num
1 probe-duration accumulate 12 4
2 probe-duration average - -
3 probe-duration consecutive 160 56
4 probe-fail accumulate 12 0
5 probe-fail consecutive 162 2
Table 3 Command output
Field
Description
Index
ID of a reaction entry.
Checked Element
Monitored performance metric.
The available performance metrics vary by NQA operation
type. For more information, see
Threshold Type
Threshold type.
Checked Num
Number of targets that have been monitored for data
collection.
Over-threshold Num
Number of threshold violations.
Table 4 Monitored performance metrics for DHCP/DLSw/DNS/FTP/HTTP/ICMP
echo/SNMP/TCP/UDP echo operations
Monitored
performance
metric
Threshold
type
Collect data in Checked Num
Over-threshold Num
probe-duration
accumulate
Probes after the
operation starts.
Number of
completed probes.
Number of probes with
duration exceeding the
threshold.
average
N/A
N/A
N/A
consecutive
Probes after the
operation starts.
Number of
completed probes.
Number of probes with
duration exceeding the
threshold.
probe-fail
accumulate
Probes after the
operation starts.
Number of
completed probes.
Number of probe failures.
Summary of Contents for SOHO IE4300
