97
Parameters
seconds
: Specifies the dead interval in the range of 1 to 2147483647 seconds.
Usage guidelines
If an interface receives no hello packet from a neighbor within the dead interval, the interface
considers the neighbor down.
The dead interval on an interface is a minimum of four times the hello interval. Routers attached to
the same segment must have the same dead interval.
Examples
# Set the dead interval for VLAN-interface 10 to 60 seconds.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospf timer dead 60
Related commands
ospf timer hello
ospf timer hello
Use
ospf timer hello
to set the hello interval on an interface.
Use
undo ospf timer hello
to restore the default.
Syntax
ospf timer hello seconds
undo ospf timer hello
Default
The hello interval is 10 seconds for P2P and broadcast interfaces, and is 30 seconds for P2MP and
NBMA interfaces.
Views
Interface view
Predefined user roles
network-admin
Parameters
seconds
: Specifies the hello interval in the range of 1 to 65535 seconds.
Usage guidelines
The shorter the hello interval, the faster the topology converges, and the more resources are
consumed. Make sure the hello interval on two neighboring interfaces is the same.
Examples
# Set the hello interval on VLAN-interface to 20 seconds.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospf timer hello 20
Related commands
ospf timer dead
Summary of Contents for SOHO IE4300
