2
Field
Description
when no member device is specified.
Ports (1 in total)
Ports where the PIM snooping neighbors reside, and the total number of
the ports.
(02:02:23)
Remaining aging timer for a PIM snooping neighbor on the port.
This field is always displayed for global ports (such as Layer 2 aggregate
interfaces).
For a non-global port, this field is displayed when one of the following
conditions exists:
•
The port is on the specified member device.
•
The port is on the master device and no member device is specified.
LAN Prune Delay
The PIM hello message sent by the PIM snooping neighbor has the
LAN_Prune_Delay option.
(T)
The join message suppression feature has been disabled for the PIM
snooping neighbor.
display pim-snooping router-port
Use
display pim-snooping router-port
to display PIM snooping router port information.
Syntax
display pim-snooping router-port
[
vlan
vlan-id
]
[
slot
slot-number
]
[
verbose
]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan
vlan-id
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a
VLAN, this command displays PIM snooping router port information for all VLANs.
verbose
: Displays detailed information about PIM snooping router ports. If you do not specify this
keyword, the command displays brief information about PIM snooping router ports.
slot
slot-number
: Specifies an IRF member device by its member ID. If you do not specify a
member device, this command displays PIM snooping router port information for the master device.
Examples
# Display brief information about PIM snooping router ports for VLAN 2.
<Sysname> display pim-snooping router-port vlan 2
VLAN 2:
Router ports (2 in total):
GE1/0/1 (00:01:30)
GE1/0/2 (00:01:32)
# Display detailed information about PIM snooping router ports for VLAN 2.
<Sysname> display pim-snooping router-port vlan 2 verbose
VLAN 2:
Summary of Contents for SOHO IE4300
