96
Views
User view
Predefined user roles
network-admin
Examples
# Clear RADIUS statistics.
<Sysname> reset radius statistics
Related commands
display radius statistics
reset stop-accounting-buffer (for RADIUS)
Use
reset stop-accounting-buffer
to clear buffered RADIUS stop-accounting requests to
which no responses have been received.
Syntax
reset stop-accounting-buffer
{
radius-scheme
radius-scheme-name
|
session-id
session-id
|
time-range
start-time end-time
|
user-name
user-name
}
Views
User view
Predefined user roles
network-admin
Parameters
radius-scheme
radius-scheme-name
: Specifies a RADIUS scheme by its name, a
case-insensitive string of 1 to 32 characters.
session-id
session-id
: Specifies a session by its ID. The
session-id
argument is a string
of 1 to 64 characters and cannot contain a letter. A session ID uniquely identifies an online user for a
RADIUS scheme.
time-range
start-time end-time
: Specifies a time range. The start time and end time must
be in the format of hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd.
user-name
user-name
: Specifies a user by its name, a case-sensitive string of 1 to 255
characters. Whether the
user-name
argument should include the domain name depends on the
setting configured by using the
user-name-format
command for the RADIUS scheme.
Examples
# Clear nonresponded RADIUS stop-accounting requests buffered for user
user0001@test
.
<Sysname> reset stop-accounting-buffer user-name user0001@test
# Clear nonresponded RADIUS stop-accounting requests buffered from 0:0:0 to 23:59:59 on August
31, 2015.
<Sysname> reset stop-accounting-buffer time-range 0:0:0-08/31/2015 23:59:59-08/31/2015
Related commands
display stop-accounting-buffer
(for RADIUS)
stop-accounting-buffer enable
(RADIUS scheme view)
Summary of Contents for SOHO IE4300
