36
Field
Description
Admin Status
Administrative status:
Up
or
Down
.
State
State of the router in the VRRP group:
•
Master
—The router is the master in the VRRP group.
•
Backup
—The router is the backup in the VRRP group.
•
Initialize
—The router is in
Initialize
state.
•
Inactive
—The router is in
Inactive
state, for example, when the
router is not assigned a virtual IP address by using the
vrrp vrid
command.
Config Pri
Configured priority of the router, which is configured by using the
vrrp
ipv6 vrid priority
command.
Running Pri
Current priority of the router.
When a track entry is associated with a VRRP group on the router, the
router's priority changes when the track entry's status changes.
Preempt Mode
Preemptive mode:
•
Yes
.
•
No
.
Delay Time
Preemption delay in centiseconds.
Become Master
Time (in milliseconds) that a backup router has to wait before it becomes
the master. This field is displayed only when the router is a backup.
Auth Type
Authentication type. Only
none
is available, which means no
authentication is required.
Virtual IP
Virtual IP address list of the VRRP group.
Member IP List
IP addresses of the member devices in the VRRP group:
•
Local
—IP address of the local router.
•
Master
—IP address of the master.
•
Backup
—
IP address of the backup.
VRRP Track Information
Track entry that is associated with the VRRP group. This field is displayed
only after you configure the
vrrp ipv6 vrid track
command.
Track Object
Track entry to be monitored. This field is displayed only after you
configure the
vrrp ipv6 vrid track
command.
State
Track entry state:
•
Negative
.
•
Positive
.
•
NotReady
.
Pri Reduced
Value by which the priority decreases when the status of the associated
track entry becomes Negative. This field is displayed only after you
configure the
vrrp ipv6 vrid track
command.
Switchover
Switchover mode. When the status of the associated track entry becomes
Negative, the backup immediately becomes the master.
Forwarder Information: 2
Forwarders 1 Active
VF information: Two VFs exist and one is the AVF.
Config Weight
Configured weight of the VF: 255.
Running Weight
Current weight of the VF.
When a track entry is associated with the VFs of a VRRP group, the VFs'
weights change when the track entry's status changes.
Summary of Contents for SOHO IE4300
