H3C SOHO IE4300, Command Reference Manual

Page: 1372 / 3296

3
nssa-only
: Limits the route advertisement to the NSSA area by setting the P-bit of Type-7 LSAs to
0. By default, the P-bit of Type-7 LSAs is set to 1. If the ASBR is also an ABR and FULL state
neighbors exist in the backbone area, the P-bit of Type-7 LSAs originated by the ASBR is set to 0.
This keyword applies to the NSSA ASBR.
tag tag
: Specifies a tag for the summary route, in the range of 0 to 4294967295.
Usage guidelines
An ASBR can summarize routes in the following LSAs:
•
Type-5 LSAs.
•
Type-7 LSAs in an NSSA area.
•
Type-5 LSAs translated by the ASBR (also an ABR) from Type-7 LSAs in an NSSA area.
If the ASBR (ABR) is not a translator, it cannot summarize routes in Type-5 LSAs translated
from Type-7 LSAs.
To enable ASBR to advertise specific routes that have been summarized, use the undo
asbr-summary command.
Examples
# Configure a summary route 2000::/16, and specify a cost of 100 and a tag value of 2 for the
summary route.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] asbr-summary 2000:: 16 cost 100 tag 2
authentication-mode
Use
authentication-mode
to specify an authentication mode for an OSPFv3 area.
Use undo authentication-mode to restore the default.
Syntax
authentication-mode keychain keychain-name
undo authentication-mode
Default
No authentication is performed for an area.
Views
OSPFv3 area view
Predefined user roles
network-admin
Parameters
keychain
: Specifies the keychain authentication mode.
keychain-name
: Specifies a keychain by its name, a case-sensitive string of 1 to 63 characters.
Usage guidelines
The authentication mode specified for an OSPFv3 interface has a higher priority than the mode
specified for an OSPFv3 area.
When keychain authentication is configured for an OSPFv3 area, OSPFv3 performs the following
operations before sending a packet:
1. Obtains a valid send key from the keychain.