H3C SOHO IE4300, Command Reference Manual

Page: 3254 / 3296

13
Related commands
destination-group
(subscription view)
subscription
display dns host
( Layer 3—IP Services Command Reference )
sensor path
Use
sensor path
to configure a sensor path.
Use
undo sensor path
to delete a sensor path.
Syntax
sensor path path
undo sensor path path
Default
No sensor paths exist.
Views
Sensor group view
Predefined user roles
network-admin
Parameters
path : Specifies a data path. For information about the available paths, enter a question mark (?) in
the position of this argument.
Usage guidelines
To configure multiple sensor paths, execute this command multiple times.
The device supports a maximum of 128 sensor paths.
If the device does not support the specified sensor path, the command displays an error message.
To modify the sensor path configuration for a sensor group that is already used by a subscription, you
must remove the sensor group from the subscription first.
Examples
# Configure sensor path ifmgr/devicecapabilities/ for sensor group test .
<Sysname> system-view
[Sysname] telemetry
[Sysname-telemetry] sensor-group test
[Sysname-telemetry-sensor-group-test] sensor path ifmgr/devicecapabilities/
Related commands
sensor-group
(subscription view)
subscription
sensor-group (subscription view)
Use sensor-group to specify a sensor group for a subscription.
Use
undo sensor-group
to remove a sensor group from a subscription.