11
packets denied
Totally 100% permitted, 0%
denied
Ratios of permitted and denied packets to all packets.
IPv4 default action
Packet filter default action for packets that do not match any IPv4
ACLs:
•
Deny
—The default action
deny
has been successfully applied for
packet filtering.
•
Deny (Failed)
—The device has failed to apply the default action
deny
for packet filtering. The action
permit
still functions.
•
Permit
—The default action
permit
has been successfully applied
for packet filtering.
IPv6 default action
Packet filter default action for packets that do not match any IPv6
ACLs:
•
Deny
—The default action
deny
has been successfully applied for
packet filtering.
•
Deny (Failed)
—The device has failed to apply the default action
deny
for packet filtering. The action
permit
still functions.
•
Permit
—The default action
permit
has been successfully applied
for packet filtering.
MAC default action
Packet filter default action for packets that do not match any Layer 2
ACLs:
•
Deny
—The default action
deny
has been successfully applied for
packet filtering.
•
Deny (Failed)
—The device has failed to apply the default action
deny
for packet filtering. The action
permit
still functions.
•
Permit
—The default action
permit
has been successfully applied
for packet filtering.
Related commands
reset
packet-filter
statistics
display packet-filter statistics sum
Use
display
packet-filter
statistics sum
to display accumulated packet filtering
statistics for an ACL.
Syntax
display
packet-filter
statistics
sum
{
inbound
|
outbound
}
[
ipv6
|
mac
]
{
acl-number
|
name
acl-name
}
[
brief
]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
inbound
: Specifies the inbound direction.
outbound
: Specifies the outbound direction.
ipv6
: Specifies the IPv6 ACL type.
mac
: Specifies the Layer 2 ACL type.
Summary of Contents for SOHO IE4300
