H3C SOHO IE4300, Command Reference Manual

Page: 2828 / 3296

17
UDP-tracert results:
TTL Hop IP Time
1 3.1.1.1 2013-09-09 14:23:24.5
2 4.1.1.1 2013-09-09 14:23:24.5
Table 6 Command output
Field Description
Data collecting in progress The operation is in progress.
Send operation times Number of operations.
Receive response times Number of response packets received.
Min/Max/Average round trip time Minimum/maximum/average round-trip time in milliseconds.
Square-Sum of round trip time Square sum of round-trip time.
Last succeeded probe time
Time when the last successful probe was completed. If no probes
are successful in an operation, the field displays
0 .
This field is not available for UDP jitter, path jitter, and voice
operations.
Last packet received time
Time when the last response packet was received. If no response
packets in a probe were received, the field displays
0 .
This field is available only for UDP jitter and voice operations.
Packet loss ratio Average packet loss ratio.
Failures due to timeout Number of timeout occurrences in an operation.
Failures due to disconnect Number of disconnections by the peer.
Failures due to no connection Number of failures to connect with the peer.
Failures due to internal error Number of failures due to internal errors.
Failures due to other errors Failures due to other errors.
Packets out of sequence Number of failures due to out-of-sequence packets.
ICMP-jitter results
ICMP jitter operation results.
This field is available only for the ICMP jitter operation.
Packets arrived late Number of response packets received after a probe times out.
UDP-jitter results
UDP jitter operation results.
This field is available only for the UDP jitter operation.
Voice results
Voice operation results.
This field is available only for the voice operation.
RTT number Number of response packets received.
Min positive SD Minimum positive jitter from source to destination.
Min positive DS Minimum positive jitter from destination to source.
Max positive SD Maximum positive jitter from source to destination.
Max positive DS Maximum positive jitter from destination to source.
Positive SD number Number of positive jitters from source to destination.