4
Parameters
group-id
: Specifies a monitor link group ID. The value range for the
group-id
argument is 1 to
16.
Examples
# Create monitor link group 1 and enter its view.
<Sysname> system-view
[Sysname] monitor-link group 1
[Sysname-mtlk-group1]
port
Use
port
to assign an interface to a monitor link group.
Use
undo port
to remove an interface from a monitor link group.
Syntax
port interface-type
interface-number
{
downlink
|
uplink
}
undo port interface-type interface-number
Default
No member interfaces exist in a monitor link group.
Views
Monitor link group view
Predefined user roles
network-admin
Parameters
interface-type
: Specifies an interface by its type.
interface-number
: Specifies an interface by its number.
downlink
: Specifies a downlink interface.
uplink
: Specifies an uplink interface.
Usage guidelines
You can assign an interface to only one monitor link group.
You can also assign an interface to a monitor link group by using the
port monitor-link group
command in interface view.
If you have configured a Selected port of an aggregation group as the downlink interface of a monitor
link group, do not configure an Unselected port of the aggregation group as the uplink interface of the
monitor link group.
Do not assign an aggregate interface and member ports of the aggregate group to the same monitor
link group.
Examples
# Configure GigabitEthernet 1/0/1 as an uplink interface and GigabitEthernet 1/0/2 as a downlink
interface for monitor link group 1.
<Sysname> system-view
[Sysname] monitor-link group 1
[Sysname-mtlk-group1] port gigabitethernet 1/0/1 uplink
Summary of Contents for SOHO IE4300
