H3C SOHO IE4300, Command Reference Manual

Page: 596 / 3296

6
Syntax
mrp timer join timer-value
undo mrp timer join
Default
The Join timer is 20 centiseconds.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
timer-value : Specifies the Join timer value (in centiseconds). The Join timer must meet the
following requirements:
•
Not less than 20 centiseconds.
•
Less than half the Leave timer.
•
Divisible by 20 centiseconds.
Examples
# Set the Join timer to 40 centiseconds. (In this example, the Leave timer is 100 centiseconds.)
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mrp timer join 40
Related commands
display mvrp running-status
mrp timer leave
mrp timer leave
Use
mrp timer leave
to set the Leave timer.
Use
undo mrp timer leave
to restore the default.
Syntax
mrp timer leave timer-value
undo mrp timer leave
Default
The Leave timer is 60 centiseconds.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin