H3C SOHO IE4300, Command Reference Manual

Page: 1437 / 3296

68
Syntax
ospfv3 ipsec-profile profile-name [ instance instance-id ]
undo ospfv3 ipsec-profile [ instance instance-id ]
Default
No IPsec profile is applied to an OSPFv3 interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
profile-name
: Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63
characters.
instance instance-id
: Specifies an instance by its ID in the range of 0 to 255. The default is 0.
Usage guidelines
An IPsec profile must be specified in this command. For more information about IPsec profiles, see
Security Configuration Guide .
Examples
# Apply IPsec profile profile001 to VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospfv3 ipsec-profile profile001
ospfv3 mib-binding
Use
ospfv3 mib-binding
to bind an OSPFv3 process to MIB.
Use undo ospfv3 mib-binding to restore the default.
Syntax
ospfv3 mib-binding process-id
undo ospfv3 mib-binding
Default
MIB is bound to the OSPFv3 process with the smallest process ID.
Views
System view
Predefined user roles
network-admin
Parameters
process-id
: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
Usage guidelines
If the specified process ID does not exist, the MIB binding configuration fails.
Deleting an OSPFv3 process that has been bound to MIB unbinds the OSPFv3 process from MIB,
and re-binds MIB to the OSPFv3 process with the smallest process ID.