55
•
4-bit slot number.
•
8-bit port index.
•
12-bit VLAN ID.
Views
RADIUS scheme view
Predefined user roles
network-admin
Usage guidelines
Perform this task to specify the format of the NAS-Port attribute (attribute 5) sent by the device to the
RADIUS server. If you specify the port format, the attribute contains the value in the last segment of
the user access interface. For example, if a user comes online from GigabitEthernet 1/0/2, the value
for the NAS-Port attribute is 2.
To exchange RADIUS packets correctly with a RADIUS server, configure the device with the same
NAS-Port attribute format as the RADIUS server.
This command takes effect on the RADIUS packets for all types of network access users.
Examples
# Set the NAS-Port attribute format to the port format in RADIUS scheme
radius1
.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] attribute 5 format port
Related commands
display radius scheme
attribute 15 check-mode
Use
attribute 15 check-mode
to configure the Login-Service attribute check method for SSH,
FTP, and terminal users.
Use
undo attribute 15 check-mode
to restore the default.
Syntax
attribute 15 check-mode
{
loose
|
strict
}
undo attribute 15 check-mode
Default
The strict check method applies for SSH, FTP, and terminal users.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
loose
: Matches the standard Login-Service attribute value 0 for SSH, FTP, and terminal services.
strict
: Matches Login-Service attribute values 50, 51, and 52 for SSH, FTP, and terminal services,
respectively.
Summary of Contents for SOHO IE4300
