H3C SOHO IE4300, Command Reference Manual

Page: 1867 / 3296

86
code attribute-code
: Specifies the ID of the RADIUS attribute in the attribute set. The value
range for the
attribute-code
argument is 1 to 255.
type
: Specifies a data type for the attribute content.
binary
: Binary type.
date
: Date type.
integer
: Integer type.
interface-id : Interface ID type.
ip
: IPv4 address type.
ipv6
: IPv6 address type.
ipv6-prefix
: IPv6 address prefix type.
octets
: Octet type.
string : String type.
Usage guidelines
To support the proprietary RADIUS attributes of other vendors, perform the following tasks:
1. Use this command to define the attributes as extended RADIUS attributes.
2. Use the
attribute convert
command to map the extended RADIUS attributes to
attributes supported by the system.
3. Use the
attribute translate
command to enable the RADIUS attribute translation
feature for the mappings to take effect.
To cooperate with RADIUS servers of a third-party vendor, map attributes that cannot be identified by
the server to server-supported attributes.
Two RADIUS attributes cannot have the same combination of attribute name, vendor ID, and
attribute ID.
If you do not specify a RADIUS attribute name, the
undo radius attribute extended
command deletes all user-defined extended RADIUS attributes.
Examples
# Define a string-type extended RADIUS attribute with attribute name Owner-Password , vendor ID
122, and attribute ID 80.
<Sysname> system-view
[Sysname] radius attribute extended Owner-Password vendor 122 code 80 type string
Related commands
attribute convert (RADIUS DAS view)
attribute convert
(RADIUS scheme view)
attribute reject
(RADIUS DAS view)
attribute reject
(RADIUS scheme view)
attribute translate
radius attribute-test-group
Use radius attribute-test-group to create a RADIUS attribute test group and enter its view,
or enter the view of an existing RADIUS attribute test group.
Use undo radius attribute-test-group to remove a RADIUS attribute test group.