38
You can configure a host name in one of the following ways:
•
For exact match
—Specify a complete host name. For example, if you configure the host name
as
abc.com.cn
in the portal-free rule, only packets that contain the host name
abc.com.cn
match the rule. Packets that carry any other host names (such as
dfabc.com.cn
) do not match
the rule.
•
For fuzzy match
—Specify a host name by placing the asterisk (*) wildcard character at the
beginning or end of the host name string. For example, if you configure the host name as
*abc.com.cn, abc*
, or
*abc*,
packets that carry the host name ending with
abc.com.cn
,
starting with
abc
, or including
abc
match the rule.
The asterisk (*) wildcard character represents any characters. The device treats multiple
consecutive asterisks as one.
The configured host name cannot contain only asterisks (*).
The fuzzy match feature takes effect only on HTTP or HTTPS requests initiated by Web browsers.
You cannot configure two destination-based portal-free rules with the same destination information.
Otherwise the system prompts you that the same rule already exists.
Examples
# Configure a destination-based portal-free rule: specify the rule number as
4
and host name as
www.h3c.com
. This rule allows the portal user who sends the HTTP/HTTPS request that carries the
host name
www.h3c.com
to access network resources without authentication.
<Sysname> system-view
[Sysname] portal free-rule 4 destination www.h3c.com
Related commands
display portal rule
portal free-rule source
Use
portal free-rule source
to configure a source-based portal-free rule. The filtering
criteria include source MAC address, source interface, and source VLAN.
Use
undo portal free-rule
to delete a specific or all portal-free rules.
Syntax
portal free-rule
rule-number
source
{
interface
interface-type
interface-number
|
mac
mac-address
|
vlan vlan-id
}
*
undo portal free-rule
{
rule-number
|
all
}
Default
No source-based portal-free rules exist.
Views
System view
Predefined user roles
network-admin
Parameters
rule-number
: Specifies a portal-free rule number. The value range for this argument is 0 to
4294967295.
interface
interface-type interface-number
: Specifies a source interface by its type
and number for the portal-free rule.
mac mac-address
: Specifies a source MAC address for the portal-free rule, in the form of
H-H-H
.
Summary of Contents for SOHO IE4300
