60
undo log-peer-change
Default
Logging for neighbor state changes is enabled.
Views
OSPFv3 view
Predefined user roles
network-admin
Usage guidelines
This feature enables the device to deliver logs about neighbor state changes to its information center.
The information center processes logs according to user-defined output rules (whether and where to
output logs). For more information about the information center, see
Network Management and
Monitoring Configuration Guide
.
Examples
# Disable logging for neighbor state changes for OSPFv3 process 100.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] undo log-peer-change
lsa-generation-interval
Use
lsa-generation-interval
to set the OSPFv3 LSA generation interval.
Use
undo lsa-generation-interval
to restore the default.
Syntax
lsa-generation-interval
maximum-interval
[
minimum-interval
[
incremental-interval
]
]
undo lsa-generation-interval
Default
The maximum interval is 5 seconds, the minimum interval is 0 milliseconds, and the incremental
interval is 0 milliseconds.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
maximum-interval
: Specifies the maximum OSPFv3 LSA generation interval in the range of 1 to
60 seconds.
minimum-interval
: Specifies the minimum OSPFv3 LSA generation interval in the range of 10
to 60000 milliseconds. The default is 0, which indicates that the minimum interval can be any value.
incremental-interval
: Specifies the OSPFv3 LSA generation incremental interval in the
range of 10 to 60000 milliseconds.
Usage guidelines
When network changes are infrequent, LSAs are generated at the minimum interval. If network
changes become frequent, the LSA generation interval is incremented by the incremental interval ×
Summary of Contents for SOHO IE4300
