66
Predefined user roles
network-admin
Usage guidelines
This feature enables the device to detect and record user port migrations. A user port migrates if an
incoming NA packet has the same source IPv6 address and source MAC address as an existing
ND entry but a different port. The device generates a user port migration record, logs the migration
event, and sends the log to the information center. For information about the log destination and
output rule configuration in the information center, see the information center in
Network
Management and Monitoring Configuration Guide
.
Each IRF member device can generate a maximum of 10 user port migration logs per second.
When this maximum number is reached, the member device suppresses generating user port
migration logs and records the suppression times. Each IRF member device can save a maximum
of 200 user port migration records.
When the number of saved user port migration records reaches the upper limit, new records
overwrite old ones.
Examples
# Enable recording user port migrations.
<Sysname> system-view
[Sysname] ipv6 nd user-move record enable
Related commands
display ipv6 nd user-move record
ipv6 neighbor
Use
ipv6 neighbor
to configure a static neighbor entry.
Use
undo ipv6 neighbor
to delete a neighbor entry.
Syntax
ipv6 neighbor ipv6-address mac-address
{
vlan-id port-type
port-number
|
interface
interface-type interface-number
}
[
vpn-instance
vpn-instance-name
]
undo ipv6 neighbor
ipv6-address interface-type interface-number
Default
No static neighbor entries exist.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6-address
: Specifies the IPv6 address of the static neighbor entry.
mac-address
: Specifies the MAC address (48 bits) of the static neighbor entry, in the format of
H-H-H.
vlan-id
: Specifies the VLAN ID of the static neighbor entry, in the range of 1 to 4094.
port-type
port-number
: Specifies a Layer 2 port of the static neighbor entry by its type and
number.
Summary of Contents for SOHO IE4300
