H3C SOHO IE4300, Command Reference Manual

Page: 371 / 3296

42
Predefined user roles
network-admin
Parameters
crc-error
: Enables the CRC error packet alarm function for interfaces.
input-error
: Enables the input error packet alarm function for interfaces.
output-error : Enables the output error packet alarm function for interfaces.
Examples
# Enable the CRC error packet alarm function for interfaces.
<Sysname> system-view
[Sysname] snmp-agent trap enable ifmonitor crc-error
speed
Use speed to set the speed of an Ethernet interface.
Use undo speed to restore the default.
Syntax
speed { 100 | 1000 | 2500 | 5000 | 10000 | auto }
undo speed
Default
An Ethernet interface negotiates a speed with its peer.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
10
: Sets the interface speed to 10 Mbps.
100 : Sets the interface speed to 100 Mbps.
1000
: Sets the interface speed to 1000 Mbps.
2000
: Sets the interface speed to 2000 Mbps.
2500
: Sets the interface speed to 2500 Mbps.
5000
: Sets the interface speed to 5000 Mbps.
10000 : Sets the interface speed to 10000 Mbps.
auto
: Enables the interface to negotiate a speed with its peer.
Usage guidelines
For an Ethernet copper port, use the
speed
command to set its speed to match the speed of the
peer interface. Support of copper ports for keywords of this command varies by copper port type. For
more information, use the
speed ?
command in interface view. If the system does not prompt that
operation failed when you configure a speed for a copper port, the copper port supports this speed.
Otherwise, the copper port does not support this speed.
For a fiber port, use the speed command to set its speed to match the rate of a transceiver module.
Support of fiber ports for keywords of this command varies by fiber port type. For more information,