2
Usage guidelines
When you use the
import-route
command to redistribute routes from another routing protocol
without specifying a metric, the metric specified by the
default cost
command applies.
Examples
# Configure a default metric of 3 for redistributed routes.
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] default cost 3
Related commands
import-route
default-route
Use
default-route
to configure all interfaces running a RIP process to advertise a default route
with a specified metric to RIP neighbors.
Use
undo default-route
to restore the default.
Syntax
default-route
{
only
|
originate
}
[
cost
cost-value
|
route-policy
route-policy-name
]
*
undo default-route
Default
No default route is sent to RIP neighbors.
Views
RIP view
Predefined user roles
network-admin
Parameters
only
: Advertises only a default route.
originate
: Advertises both a default route and other routes.
cost-value
: Specifies a cost for the default route, in the range of 1 to 15. The default is 1.
route-policy
route-policy-name
: Specifies a routing policy by its name, a case sensitive
string of 1 to 63 characters. If you specify this option, the command advertises a default route only
when a route in the routing table matches the routing policy.
Usage guidelines
A RIP router configured with this feature does not receive any default route from RIP neighbors.
Examples
# Configure all interfaces running RIP process 100 to send only a default route with a metric of 2 to
RIP neighbors.
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] default-route only cost 2
Summary of Contents for SOHO IE4300
