H3C SOHO IE4300, Command Reference Manual

Page: 1277 / 3296

76
Views
OSPF area view
Predefined user roles
network-admin
Parameters
ip-address
: Specifies the IP address of a host.
cost-value
: Specifies a cost for the route, in the range of 1 to 65535.
Examples
# Advertise host route 1.1.1.1 with a cost of 100.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 0
[Sysname-ospf-100-area-0.0.0.0] host-advertise 1.1.1.1 100
import-route (OSPF view)
Use
import-route
to redistribute AS-external routes from another routing protocol.
Use
undo import-route
to disable route redistribution from another routing protocol.
Syntax
import-route { direct | static } [ cost cost-value ] | nssa-only |
route-policy route-policy-name | tag tag | type type ] *
import-route { ospf | rip } [ process-id | all-processes ] [ allow-direct |
cost cost-value | nssa-only | route-policy route-policy-name | tag tag |
type type ] *
undo import-route { direct | { ospf | rip } [ process-id | all-processes ] |
static }
Default
OSPF does not redistribute AS-external routes from any other routing protocol.
Views
OSPF view
Predefined user roles
network-admin
Parameters
direct
: Redistributes direct routes.
ospf
: Redistributes OSPF routes.
rip
: Redistributes RIP routes.
static
: Redistributes static routes.
process-id
: Specifies a process by its ID in the range of 1 to 65535. The default is 1.
all-processes : Redistributes routes from all the processes of the specified routing protocol.
allow-direct
: Redistributes the networks of the local interfaces enabled with the specified
routing protocol. If you do not specify this keyword, the networks of the local interfaces are not