20
display environment
Use
display environment
to display temperature information.
Syntax
display environment
[
slot
slot-number
]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot
slot-number
: Specifies an IRF member device by its member ID. If you do not specify a
member device, this command displays temperature information for all member devices.
Examples
# Display information about all temperature sensors on the device.
<Sysname> display environment
System temperature information (degree centigrade):
----------------------------------------------------------------------
Slot Sensor Temperature Lower Warning Alarm Shutdown
1 hotspot 1 69 0 84 98 NA
1 hotspot 2 67 0 84 98 NA
1 hotspot 3 33 0 100 110 NA
1 hotspot 4 33 0 100 110 NA
1 hotspot 5 38 0 100 110 NA
1 hotspot 6 36 0 100 110 NA
1 hotspot 7 35 0 100 110 NA
1 hotspot 8 42 0 100 110 NA
Table 6 Command output
Field
Description
System Temperature
information (degree centigrade)
Temperature information (°C).
sensor
Temperature sensor:
hotspot
—Hotspot sensor.
Slot
Sensor position.
Temperature
Current temperature.
Lower
Lower temperature limit. If the device does not support this field, this field
displays
NA
.
Warning
Warning temperature threshold. If the device does not support this field,
this field displays
NA
.
Alarm
Alarming temperature threshold. If the device does not support this field,
this field displays
NA
.
Shutdown
Shutdown temperature threshold. When the sensor temperature reaches
the limit, the system shuts down automatically. If the device does not
Summary of Contents for SOHO IE4300
