H3C SOHO IE4300, Command Reference Manual

Page: 1236 / 3296

35
Usage guidelines
If you do not specify the
interface-type interface-number
argument or the
verbose
keyword, this command displays OSPF brief information for all interfaces.
Examples
# Display all OSPF interface brief information.
<Sysname> display ospf interface
OSPF Process 1 with Router ID 192.168.1.1
Interfaces
Area: 0.0.0.0
IP Address Type State Cost Pri DR BDR
192.168.1.1 PTP P-2-P 1562 1 0.0.0.0 0.0.0.0
Area: 0.0.0.1
IP Address Type State Cost Pri DR BDR
172.16.0.1 Broadcast DR 1 1 172.16.0.1 0.0.0.0
Table 17 Command output
Field Description
Area Area ID of the interface.
IP Address Interface IP address (regardless of whether TE is enabled or not).
Type Interface network type: PTP (P2P), PTMP (P2MP), Broadcast, or NBMA.
State
Interface state:
•
Down —No protocol traffic can be sent or received on the interface.
•
Loopback —The interface is in loopback state and it cannot forward traffic.
•
Waiting —The interface starts sending and receiving Hello packets. The
router is trying to determine the identity of the (Backup) designated router
for the network.
•
P-2-P —The interface will send Hello packets at the hello interval, and try
to establish an adjacency with the neighbor.
•
DR —The router is the designated router on the network.
•
BDR —The router is the backup designated router on the network.
•
DROther —The router is a DR Other router on the attached network.
Cost Interface cost.
Pri Router priority.
DR DR on the interface's network segment.
BDR BDR on the interface's network segment.
# Display detailed information about VLAN-interface 10.
<Sysname> display ospf interface vlan-interface 10
OSPF Process 1 with Router ID 192.168.1.1
Interfaces
Area: 0.0.0.0