120
Table 11 Command output
Field
Description
Index
Index number of the HWTACACS scheme.
Primary Auth Server
Primary HWTACACS authentication server.
Primary Author Server
Primary HWTACACS authorization server.
Primary Acct Server
Primary HWTACACS accounting server.
Secondary Auth Server
Secondary HWTACACS authentication server.
Secondary Author Server
Secondary HWTACACS authorization server.
Secondary Acct Server
Secondary HWTACACS accounting server.
Host name
Host name of the server.
This field displays
Not configured
in the following situations:
•
The server is not configured.
•
The server is specified by IP address.
IP
IP address of the server.
This field displays
Not configured
in the following situations:
•
The server is not configured.
•
The server is specified by hostname, and the hostname is not
resolved.
Port
Service port of the HWTACACS server. If no port configuration is
performed, this field displays the default port number.
State
Status of the HWTACACS server: active or blocked.
VPN Instance
MPLS L3VPN instance to which the HWTACACS server or scheme
belongs. If no VPN instance is specified for the server or scheme,
this field displays
Not configured
.
Single-connection
Single connection status:
•
Enabled
—Establish only one TCP connection for all users to
communicate with the server.
•
Disabled
—Establish a TCP connection for each user to
communicate with the server.
NAS IP Address
Source interface or source IP addresses for outgoing HWTACACS
packets.
This field displays
Not configured
if no source interface or source
IP addresses are specified for outgoing HWTACACS packets.
Server Quiet Period(minutes)
Quiet period for the primary servers, in minutes.
Realtime Accounting
Interval(minutes)
Real-time accounting interval, in minutes.
Stop-accounting packets buffering
Whether buffering of nonresponded HWTACACS stop-accounting
requests is enabled.
Retransmission times
Maximum number of transmission attempts for individual
HWTACACS stop-accounting requests.
Response Timeout Interval(seconds)
HWTACACS server response timeout period, in seconds.
Username Format
Format for the usernames sent to the HWTACACS server:
•
with-domain
—Includes the domain name.
•
without-domain
—Excludes the domain name.
•
keep-original
—Forwards the username as the username is
entered.
Summary of Contents for SOHO IE4300
