130
As a best practice, specify the
single-connection
keyword to reduce TCP connections for
improving system performance if the HWTACACS server supports the single-connection method.
If the specified server resides on an MPLS L3VPN, specify the VPN instance by using the
vpn-instance vpn-instance-name
option. The VPN instance specified by this command
takes precedence over the VPN instance specified for the HWTACACS scheme.
You can remove an accounting server only when it is not used for user accounting. Removing an
accounting server affects only accounting processes that occur after the remove operation.
Examples
# In HWTACACS scheme
hwt1
, specify the primary accounting server with IP address
10.163.155.12, TCP port number 49, and plaintext shared key
123456TESTacct&!
.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary accounting 10.163.155.12 49 key simple 123456TESTacct&!
Related commands
display hwtacacs scheme
key
(HWTACACS scheme view)
secondary accounting
(HWTACACS scheme view)
vpn-instance
(HWTACACS scheme view)
primary authentication (HWTACACS scheme view)
Use
primary authentication
to specify the primary HWTACACS authentication server.
Use
undo primary authentication
to restore the default.
Syntax
primary authentication
{
host-name
|
ipv4-address
|
ipv6
ipv6-address
}
[
port-number
|
key
{
cipher
|
simple
}
string
|
single-connection
|
vpn-instance vpn-instance-name
]
*
undo primary authentication
Default
The primary HWTACACS authentication server is not specified.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
host-name
: Specifies the host name of the primary HWTACACS authentication server, a
case-insensitive string of 1 to 253 characters.
ipv4-address
: Specifies the IPv4 address of the primary HWTACACS authentication server.
ipv6
ipv6-address
: Specifies the IPv6 address of the primary HWTACACS authentication
server.
port-number
: Specifies the service port number of the primary HWTACACS authentication server.
The value range for the TCP port number is 1 to 65535. The default setting is 49.
Summary of Contents for SOHO IE4300
