H3C SOHO IE4300, Command Reference Manual

Page: 1896 / 3296

115
When you modify the real-time accounting interval, the following rules apply to users that have been
online before the modification:
•
If you modify the real-time accounting interval from a non-zero value to zero or from zero to a
non-zero value, the modification does not take effect on these users. These users still use the
old real-time accounting interval.
•
If you modify the real-time accounting interval from a non-zero value to another non-zero value,
the modification takes effect immediately on these users.
If a user uses RADIUS accounting but not RADIUS authentication and authorization, the device
performs real-time accounting for that user only based on the real-time accounting interval set in the
user's RADIUS accounting scheme. The real-time accounting interval assigned by the RADIUS
accounting server does not take effect.
Examples
# In RADIUS scheme radius1 , set the real-time accounting interval to 51 minutes.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer realtime-accounting 51
Related commands
retry realtime-accounting
timer response-timeout (RADIUS scheme view)
Use timer response-timeout to set the RADIUS server response timeout timer.
Use
undo timer response-timeout
to restore the default.
Syntax
timer response-timeout seconds
undo timer response-timeout
Default
The RADIUS server response timeout period is 3 seconds.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
seconds
: Specifies the RADIUS server response timeout period, in the range of 1 to 10 seconds.
Usage guidelines
If a NAS receives no response from the RADIUS server in a period of time after sending a RADIUS
request, it resends the request so that the user has more opportunity to obtain the RADIUS service.
The NAS uses the RADIUS server response timeout timer to control the transmission interval.
If the client times out during the authentication process, the user is immediately logged off. To avoid
user logoffs, the value multiplied by the following items cannot be larger than the client timeout
period defined by the access module:
•
The maximum number of RADIUS packet transmission attempts.
•
The RADIUS server response timeout period.
•
The number of RADIUS servers in the RADIUS scheme.