4
PoE PSE power source : Primary
Port PSE priority : Critical
Port available power value : 100.0 w
PoE power information:
Current power : 11592 mW
Average power : 11610 mW
Peak power : 11684 mW
Table 1 Command output
Field
Description
Chassis ID
Bridge MAC address of the device.
System capabilities supported
Supported capabilities:
•
Bridge
—Switching is supported.
•
Router
—Routing is supported.
•
Repeater
—Signal repeating is supported.
•
Telephone
—The local device can act as a telephone.
•
DocsisCableDevice
—The local device can act as a
DOCSIS-compliant cable device.
•
StationOnly
—The local device can act as a station only.
•
Customer Bridge
—The customer bridge feature is supported.
•
Service Bridge
—The service bridge feature is supported.
•
TPMR
—The TPMR feature is supported.
•
Other
—Features other than those listed above are supported.
System capabilities enabled
Enabled capabilities:
•
Bridge
—Switching is enabled.
•
Router
—Routing is enabled.
•
Repeater
—Signal repeating is enabled.
•
Telephone
—The local device is acting as a telephone.
•
DocsisCableDevice
—The local device is acting as a
DOCSIS-compliant cable device.
•
StationOnly
—The local device is acting as a station only.
•
Customer Bridge
—The customer bridge feature is enabled.
•
Service Bridge
—The service bridge feature is enabled.
•
TPMR
—The TPMR feature is enabled.
•
Other
—Features other than those listed above are enabled.
Device class
MED device class:
•
Connectivity device
—Network device.
•
Class I
—Normal terminal device. It requires the basic LLDP
discovery services.
•
Class II
—Media terminal device. It supports media streams, and
can also act as a normal terminal device.
•
Class III
—Communication terminal device. It supports the IP
communication systems of end users, and can also act as a normal
terminal device or media terminal device.
MED inventory information of
master board
MED inventory information about the .
HardwareRev
Hardware version.
FirmwareRev
Firmware version.
SoftwareRev
Software version.
Summary of Contents for SOHO IE4300
