H3C SOHO IE4300, Command Reference Manual

Page: 1459 / 3296

1
IPv6 policy-based routing commands
apply next-hop
Use
apply next-hop
to set next hops.
Use
undo apply next-hop
to remove next hops.
Syntax
apply next-hop [ vpn-instance vpn-instance-name ] { ipv6-address [ direct ]
[ track track-entry-number ] } &<1-2>
undo apply next-hop [ [ vpn-instance vpn-instance-name | inbound-vpn ]
ipv6-address &<1-2> ]
Default
No next hops are set.
Views
IPv6 policy node view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name
: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. The specified VPN instance must already exist.
ipv6-address
: Specifies the IPv6 address of the next hop. If you do not specify the
vpn-instance vpn-instance-name
option or the
inbound-vpn
keyword, the next hop
belongs to the public network.
direct
: Specifies that the next hop must be directly connected to take effect.
track track-entry-number
: Specifies a track entry by its number in the range of 1 to 1024.
&<1-2>
: Indicates that the argument before it can be entered up to two times.
Usage guidelines
You can specify multiple next hops for backup in one command line or by executing this command
multiple times.
With a next hop specified, the
undo apply next-hop
command removes the next hop.
Without any next hop specified, the undo apply next-hop command removes all next hops.
Examples
# Set a directly-connected next hop of 1::1.
<Sysname> system-view
[Sysname] ipv6 policy-based-route aa permit node 11
[Sysname-pbr6-aa-11] apply next-hop 1::1
description
Use description to configure a description for an IPv6 policy node.
Use undo description to restore the default.