2
action reboot
Use
action reboot
to add a reboot action to a monitor policy.
Use
undo action
to remove an action.
Syntax
action number reboot
[
slot
slot-number
]
undo action number
Default
A monitor policy does not contain any actions.
Views
CLI-defined policy view
Predefined user roles
network-admin
Parameters
number
: Specifies an action ID in the range of 0 to 231.
slot
slot-number
: Specifies an IRF member device by its member ID. If you do not specify a
member device, the command reboots the IRF fabric.
Usage guidelines
The reboot action configured with this command reboots devices or cards without saving the running
configuration. If you want to save the running configuration, use the
action cli
command to
configure reboot actions.
You can configure a series of actions to be executed in response to the event specified in a monitor
policy. EAA executes the actions in ascending order of action IDs. When you add actions to a policy,
you must make sure the execution order is correct. If two actions have the same ID, the most recent
one takes effect.
When you define an action, you can specify a value or specify a variable name for an argument. For
more information about using EAA environment variables, see "
Examples
# Configure an action for the CLI-defined policy
test
to reboot the specified slot.
<Sysname> system-view
[Sysname] rtm cli-policy test
[Sysname-rtm-test] action 3 reboot slot 1
action switchover
Use
action switchover
to add an active/standby switchover action to a monitor policy.
Use
undo action
to remove an action.
Syntax
action number switchover
undo action number
Default
A monitor policy does not contain any actions.
Summary of Contents for SOHO IE4300
